|
Product Overview
The TDK RF Solutions MCP-01 Master Control Panel is designed for EMC
testing control rooms to provide interlock status, fiber optic links to
remote locations or racks, and protection monitoring.
Control of Remote Locations
The interlocks from several remote racks can be daisy-chained together so
that if any single rack is triggered the whole system will react. This
gives you the flexibility of operating safely from any location within the
system confines.
Automatic or Manual Safety Features
The
interlock section of the MCP-01 contains automatic and manual controls for
safety. In automatic mode, if the shielded room door is opened the LED
will extinguish, alerting the user of a dangerous situation, while the
amplifier inputs are automatically terminated into 50 Ohm input protection
loads, which prevents them from radiating any fields into the shielded
room. If the manual RF override switch is used, the LED will also
extinguish itself. The RF override switch will also terminate the
amplifier inputs into the 50 Ohm loads. The RF override switch interface
allows the operator to physically force the amplifier input to a low level
by "grounding" it to a 50 Ohm reference.
Power Controls The MCP-01's
primary power-on button consists of a backlit push panel indicator. It
activates the main rack's power as well as any remote racks that might
be on the fiber optic link. Multiple racks, in various locations, can be
turned on or off from a single point. As with the safety features, the
redundant on/off features are present on every rack, rear and remote,
insuring that the operator can intervene with the system at any location.
System Features
-
Automatic or manual control of safety features
-
Daisy-chain with remote interlocks to provide operating safety in any
location
-
Redundant control of power on/off for system from each remote location
-
Fiber optic cabling provides immunity to outside disturbances
-
Large, highly visible punch-down power cut off switch
Ordering Information
Product: Master Control Panel
Model Number: MCP-01
Warranty: 1 year
____________________________________________________________________________________________
To place an order or to learn more about the TDK RF Solutions products
that best meet your needs, contact your TDK RF Solutions sales
representative:
TDK RF Solutions Inc.
1101 Cypress Creek Rd.
Cedar Park, Texas 78613 USA
Phone:
+1 (512) 258-9478
Fax: +1 (512) 258-0740
E-mail: info@tdkrf.com
Specifications subject to change without
notice.
|
