|
Product Overview
The TDK RF Solutions PP-02 Field Probe Positioner is an x-y axis probe
positioner for remote positioning applications. The positioner is
controlled with the TDK RF Solutions SI-300 system interface, which
reduces test interruptions by allowing test engineers to remotely position
field probes during EMC/RF test procedures without opening the chamber
door. With optional TDK TestLabTM
software, the probe can also be positioned automatically.
IEC 1000-4-3 Compliant
The PP-02 can be used as part of an automated field leveling and
uniformity scheme over a defined vertical plane, satisfying IEC 1000-4-3
field uniformity measurement requirements.
During field uniformity measurements,
remote positioning of the probe eliminates 32 manual position changes (16
horizontal, 16 vertical) reducing test times up to 20%; for test
facilities that use two antennas to cover the frequency, the PP-02
eliminates 64 manual position changes.
No E-Field Interference The
PP-02 is non-obtrusive to the test environment because of its DC battery
supply, fiber optic transmission system, and non-conductive construction.
This allows accurate measurements to be made without electric field
interference from the positioner.
Applications
-
IEC 1000-4-3 field uniformity measurements
-
Automotive requirements for Expanded Field Grid Mapping
-
Multiple point planar grid mapping for Electric Field Distribution
Features
-
Field-leveling software interfaces with probe positioner to perform
various field uniformity measurements
-
Flexible grid definitions for a variety of test requirements
-
Non-conducting and rugged construction
-
Compatible with the SI-300 system interface
-
Powered by rechargeable batteries
-
Fiber optic controlled
-
Vertical axis detaches easily for storage
Mechanical Specifications
Overall Dimensions:
Height: 300 cm (118 in.)
Length: 241 cm (95 in.)
Width: 74 cm (29 in.)
Weight: 35 kg (77.6 lbs.)
Construction: Non-conductive plastic, fiberglass, acetal,
and polycarbonates
Finish: Preventive water absorption seal
Electrical Specifications
Power Requirements: 12 volts DC, 5 Ah rechargeable battery
pack
Power Consumption: N/A
Environmental Specifications
Operating Range: 0° to +40° C
Thermal Ratings: -10° to +50° C
Ordering Information
Product: Field Probe Positioner
Model Number: PP-02
Warranty: 1 year
____________________________________________________________________________________________
To place an order or to learn more about the TDK RF Solutions products
that best meet your needs, contact your TDK RF Solutions sales
representative:
TDK RF Solutions Inc.
1101 Cypress Creek Rd.
Cedar Park, Texas 78613 USA
Phone:
+1 (512) 258-9478
Fax: +1 (512) 258-0740
E-mail: info@tdkrf.com
Specifications subject to change without
notice.
|
